The anniversary model borrows the red, yellow and blue palettes used on the original Montreal dial. White milky white dial with vintageTag Heuer Replica logo, rhodium-plated hands and three blue “azurage” dial chassis.
The Popular Tag Heuer Replica minute hand at 3 o’clock is consistent with the brand’s 1970 aesthetic style, with three yellow lines, curved from 1 to 5, 10 to 15 and 20 to 25. The same yellow tone is seen on the central minute and hour hands, while the central chronograph seconds hand has a striking red lacquer.
The inner edge of the dial surrounds the sapphire crystal dial, and the inner edge of the Best Tag Heuer Replica dial is a white flange with a 60-second scale. The stainless steel case has a diameter of 39 mm. The crown at 3 o’clock and the chronograph buttons at 2 and 4 o’clock are made of polished steel.
It consists of 168 parts, including column wheels and vertical clutches for timing functions, and has a power reserve of 80 hours.
The Grand Carrera series was a major milestone for TAG Heuer Replica, being the first all-new new series released in almost 20 years. Launched in 2007 after four years of development, the Grand Carrera was designed to appeal to an older, more affluent demographic.
The Fake Grand Carrera Calibre 360 was planned to be the flagship of the TAG Heuer range, and a development of the Calibre 360 movement first launched in 2005. The photo above has never been published before, and we thank TAG Heuer for allowing this look into their design vault.
The Grand Carrera Calibre 360 was to have the same basic dial layout as the Tag Heuer Carrera Replica, meaning 60 seconds sweeping time at 3 o’clock; 30-minute chronograph register at 9 o’clock; and 1/ 10th and 100th second chronograph at 6 o’clock. Across the top of the dial is the power reserve for the Chronograph, which must be wound by hand via the crown.
It’s a handsome watch that would have been a worthy successor to the Carrera 360 and flagship to the Best Tag Heuer Replicarange back in 2010/ 11 when this watch would have been launched had development continued.
A white printed seconds and split seconds track circles the perimeter of the dial and a red downward facing triangle with a white interior is printed at the 12 o’clock position.
The new 43mm case has a water resistance of 200m/600/ft and has a solid steel case back with a radial brushed finish and a formula 1 checkered flag pattern engraved on it around the Tag Heuer ReplicaBranding.
The crown has a raised Tag Heuer logo mark on it as can be seen in one of the up-close and personal high-resolution photos below. It also has vertical grooves in it to allow you to have a firm grip on it when winding the watch.
This Tag Heuer Replica Review provides enough water resistance for some light snorkeling but not much more than that. The steel crown has a recessed red band in the center and has grooves designed into the shape making it easy to grip when winding the watch.
The bracelet first up to an 8-inch wrist and is fastened with a push-button deployant buckle that is branded with the TAG Heuer wordmark.